소개
The magazine holds the various fasteners available for the Rigid R350RHE nail gun. When the magazine is damaged such as when the nail gun has been dropped and bent the magazine out of shape the easiest option is to replace the magazine. A damaged magazine can be responsible for misfires and jams and will be a severe impediment to proper usage of the nail gun.
You will need a 5/32" to remove all screws in this guide keep track of them since they have different lengths depending on their location.
필요한 것
-
-
Remove the single 25 mm hex screw that secures the workpiece contact cover with a 5/32" Allen wrench.
-
Remove the single 14 mm hex screw that secures the magazine to the lower handle with a 5/32" Allen wrench
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.
팀
University of North Texas, Team 3-2, Kilpatrick Spring 2024 University of North Texas, Team 3-2, Kilpatrick Spring 2024 회원
UNT-KILPATRICK-S24S3G2
4 회원들
안내서 5개 작성하였습니다
