기기를 수리하세요 커뮤니티 상점

Ridgid R82005 Trigger Switch Replacement

소개

A defective drill trigger can unintentionally keep the drill on when used by operators and this safety hazard increases the chances of accidental punctures to nearby objects.

필요한 것

  1. Ridgid R82005 Trigger Switch Replacement, Trigger Switch: 1 단계, 이미지 1/1

    • Eject the battery from the drill.

    • Unscrew the seven M3x15.3mm screws, with the 2mm hex screwdriver bit, that secures the Housing Assembly.

    • Unscrew the M5x18.5mm screw if belt clip is attached.

    편집

  2. Ridgid R82005 Trigger Switch Replacement: 2 단계, 이미지 1/1

    • Push the metallic Housing Connecting clip out with flat side of the plastic spudger.

    • Eject battery before attempting this step.

    편집

  4. Ridgid R82005 Trigger Switch Replacement: 3 단계, 이미지 1/3 Ridgid R82005 Trigger Switch Replacement: 3 단계, 이미지 2/3 Ridgid R82005 Trigger Switch Replacement: 3 단계, 이미지 3/3

    • Remove the top half of the Housing Assembly.

    • Keep track of where the wires lead from the motor assembly to trigger switch.

    • Remove all internal components.

    편집

  5. Ridgid R82005 Trigger Switch Replacement: 4 단계, 이미지 1/3 Ridgid R82005 Trigger Switch Replacement: 4 단계, 이미지 2/3 Ridgid R82005 Trigger Switch Replacement: 4 단계, 이미지 3/3

    • Motor Assembly/Gearbox and Trigger Switch removed from Housing Assembly.

    • Desolder the black wire connected to the motor.

    • Flip Trigger Switch and desolder red wire.

    • To learn how to solder, use our How to Solder and Desolder Connections guide.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Alex Cominos

회원 가입일: 02/14/19

376 평판

안내서 2개 작성하였습니다

배지: 13

배지 +10개 더

팀

USF Tampa, Team S1-G2, Leahy Spring 2019 USF Tampa, Team S1-G2, Leahy Spring 2019 회원

USFT-LEAHY-S19S1G2

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 6

전체 시간: 396