기기를 수리하세요 커뮤니티 상점

Ring Spotlight Cam Battery Lights Replacement

소개

If you are having trouble with the motion-activated lights and you would like to replace them, follow the 4 steps that are provided. It will take approximately 15-35 minutes.

필요한 것

  1. Ring Spotlight Cam Battery Lights Replacement, Lights: 1 단계, 이미지 1/1

    • Remove the top plastic pad by peeling it off with a metal spudger.

    편집

  3. Ring Spotlight Cam Battery Lights Replacement: 2 단계, 이미지 1/2 Ring Spotlight Cam Battery Lights Replacement: 2 단계, 이미지 2/2

    • Remove the 7 PH00 screws around the four corners with PH00 of the lid.

    편집

  4. Ring Spotlight Cam Battery Lights Replacement: 3 단계, 이미지 1/1

    • Use the metal spudger set to break the glue lining and the motion sensor will pop out.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Smoo Rena

회원 가입일: 01/17/19

222 평판

안내서 3개 작성하였습니다

배지: 9

배지 +6개 더

팀

Eastern Washington University, Team S2-G1, Munoz Winter 2019 Eastern Washington University, Team S2-G1, Munoz Winter 2019 회원

EWU-MUNOZ-W19S2G1

4 회원들

안내서 6개 작성하였습니다

댓글 2개

this showed nothing about replacing the light bulb

Martha “purplemarty” Ewell - 답글

This is not a complete how to. The directions stop in the middle and don't show the replacement of the LEDs. Also no parts link for the replacement LED strips

Matt Newman - 답글

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 23

30일 전: 101

전체 시간: 4,822