Ring Spotlight Cam Battery Motion Detector Replacement - iFixit 수리 안내서

소개

A step-by-step guide for motion detector replacement on a Ring Spotlight Battery-Powered Cam .

필요한 것

1 단계 Motion Detector

Ring Spotlight Cam Battery Motion Detector Replacement, Motion Detector: 1 단계, 이미지 1/1

Turn Ring Spotlight Cam to the posterior side and flip upside down

2 단계

Ring Spotlight Cam Battery Motion Detector Replacement: 2 단계, 이미지 1/1

Press down on top button and open upward

3 단계

Ring Spotlight Cam Battery Motion Detector Replacement: 3 단계, 이미지 1/1

Make sure to remove the batteries in the Spotlight cam before proceeding with this step!
Open the Spotlight Cam upward and remove the two screws with a Phillips #1 screwdriver.

4 단계

Ring Spotlight Cam Battery Motion Detector Replacement: 4 단계, 이미지 1/1

Remove the two screws down the middle and lift the middle component off

5 단계

Ring Spotlight Cam Battery Motion Detector Replacement: 5 단계, 이미지 1/1

Remove the remaining 10 screws that are around the border under the tape.

6 단계

Ring Spotlight Cam Battery Motion Detector Replacement: 6 단계, 이미지 1/1

Gently close the top of the lid

7 단계

Ring Spotlight Cam Battery Motion Detector Replacement: 7 단계, 이미지 1/1

Remove the top lid and replace the LED light

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 6명과 함께

Marisol Esparza

회원 가입일: 01/17/19

37 평판

안내서 1개 작성함

배지 +2개 더

팀

Eastern Washington University, Team S2-G1, Munoz Winter 2019 Eastern Washington University, Team S2-G1, Munoz Winter 2019 회원

EWU-MUNOZ-W19S2G1

4 회원들

안내서 6개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 31

전체 시간: 1,851