기기를 수리하세요 커뮤니티 상점

Ring Stick Up Cam Microphone Replacement

소개

In this guide, we will show you how to replace the microphone in a Ring Stick Up Cam. You will need a Phillips #00 screwdriver and a plastic opening tool.

필요한 것

  1. Ring Stick Up Cam Microphone Replacement, Battery: 1 단계, 이미지 1/1

    • Remove the six 6mm Phillips #00 screws from the back of the device.

    편집

  2. Ring Stick Up Cam Microphone Replacement: 2 단계, 이미지 1/1

    • Pry off the aluminum plate using a plastic opening tool.

    편집

  3. Ring Stick Up Cam Microphone Replacement: 3 단계, 이미지 1/1

    • Remove the two 6mm Phillips #00 screws that were under the aluminum plate.

    편집

  4. Ring Stick Up Cam Microphone Replacement: 4 단계, 이미지 1/1

    • Pry off the back cover using a plastic opening tool.

    편집

  5. Ring Stick Up Cam Microphone Replacement: 5 단계, 이미지 1/1

    • Disconnect the battery power leads using a plastic opening tool.

    편집

  6. Ring Stick Up Cam Microphone Replacement: 6 단계, 이미지 1/1

    • Use a plastic opening tool to loosen the adhesive holding the battery in place and remove the battery by hand.

    편집

  8. Ring Stick Up Cam Microphone Replacement, Camera: 7 단계, 이미지 1/1

    • Remove the three silver 6mm Phillips #00 screws holding the motherboard in the device.

    편집

  9. Ring Stick Up Cam Microphone Replacement: 8 단계, 이미지 1/1

    • Disconnect the ribbon connector shown in the photo.

    편집

  10. Ring Stick Up Cam Microphone Replacement: 9 단계, 이미지 1/1

    • Remove the motherboard from the device by hand.

    편집

  11. Ring Stick Up Cam Microphone Replacement: 10 단계, 이미지 1/1

    • Remove the two black 5mm Phillips #00 screws holding the camera board into the device.

    • Remove the single silver 10mm Phillips #00 screw holding the camera board into the device.

    편집

  12. Ring Stick Up Cam Microphone Replacement: 11 단계, 이미지 1/1

    • Remove the three plastic spacers shown in the photo by hand.

    편집

  13. Ring Stick Up Cam Microphone Replacement: 12 단계, 이미지 1/1

    • Carefully disconnect the camera board from the daughterboard by sliding a plastic opening tool between the camera board and the daughterboard.

    편집

  14. Ring Stick Up Cam Microphone Replacement: 13 단계, 이미지 1/1

    • Lift the camera board out of the housing using your hand.

    편집

  15. Ring Stick Up Cam Microphone Replacement, Microphone: 14 단계, 이미지 1/1

    • Remove the six silver 4.5mm Phillips #00 screws holding the daughterboard into the device.

    편집

  16. Ring Stick Up Cam Microphone Replacement: 15 단계, 이미지 1/1

    • Use a plastic opening tool to carefully pry the microphone from the housing.

    편집

  17. Ring Stick Up Cam Microphone Replacement: 16 단계, 이미지 1/1

    • Use your hands to remove the daughterboard containing the microphone from the housing.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Chunyue Liu

회원 가입일: 02/06/19

273 평판

안내서 2개 작성하였습니다

배지: 5

배지 +2개 더

팀

UC Davis, Team S18-G3, Lore Winter 2019 UC Davis, Team S18-G3, Lore Winter 2019 회원

UCD-LORE-W19S18G3

3 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 20

전체 시간: 2,654