주요 콘텐츠로 건너뛰기

Ring Video Doorbell Housing Replacement

필요한 것

  1. Ring Video Doorbell Housing Replacement, Housing: 1 단계, 이미지 1/3 Ring Video Doorbell Housing Replacement, Housing: 1 단계, 이미지 2/3 Ring Video Doorbell Housing Replacement, Housing: 1 단계, 이미지 3/3
    • Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw's on the bottom of the device.

    • Pry open the aluminium plate using the Plastic Opening Tool(s).

    • Remove the 2 1. mm screws using the PH00 Phillips Screwdriver.

  2. Ring Video Doorbell Housing Replacement: 2 단계, 이미지 1/3 Ring Video Doorbell Housing Replacement: 2 단계, 이미지 2/3 Ring Video Doorbell Housing Replacement: 2 단계, 이미지 3/3
    • Pry open the back case as shown using the Plastic Opening Tool.

    • Disconnect the battery from motherboard by carefully pulling up on the connector.

  3. Ring Video Doorbell Housing Replacement: 3 단계, 이미지 1/3 Ring Video Doorbell Housing Replacement: 3 단계, 이미지 2/3 Ring Video Doorbell Housing Replacement: 3 단계, 이미지 3/3
    • Unscrew the 9 1 mm screwdrivers using a PH00 Phillips Screwdriver.

    • Carefully detach the motherboard, from the housing unit using your hands.

  4. Ring Video Doorbell Housing Replacement: 4 단계, 이미지 1/1
    • Remove the plastic film using the Plastic Tool Opener.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Abdulrahman

회원 가입일: 02/20/18

685 평판

안내서 3개 작성하였습니다

USF Tampa, Team S11-G5, Cheng Spring 2018 USF Tampa, Team S11-G5, Cheng Spring 2018 회원

USFT-CHENG-S18S11G5

3 회원들

안내서 10개 작성하였습니다

댓글 한 개

Hey, do you know if Ring will provide you with replacement front housing? My casing has been damaged by an attempted theft :(

Charlie Adamson - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 27

전체 시간: 3,143