기기를 수리하세요 커뮤니티 상점

Ring Video Doorbell Pro Housing Repalcement

소개

In this guide, you will learn how to take apart the Ring Video Doorbell Pro.

필요한 것

  1. Ring Video Doorbell Pro Housing Repalcement, Housing: 1 단계, 이미지 1/1

    • Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.

    번역하기

  2. Ring Video Doorbell Pro Housing Repalcement: 2 단계, 이미지 1/3 Ring Video Doorbell Pro Housing Repalcement: 2 단계, 이미지 2/3 Ring Video Doorbell Pro Housing Repalcement: 2 단계, 이미지 3/3

    • Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.

    번역하기

  4. Ring Video Doorbell Pro Housing Repalcement: 3 단계, 이미지 1/1

    • Using a PH-000 screwdriver, unscrew and set aside all four of these 5.25 mm screws.

    번역하기

  5. Ring Video Doorbell Pro Housing Repalcement: 4 단계, 이미지 1/2 Ring Video Doorbell Pro Housing Repalcement: 4 단계, 이미지 2/2

    • Using a plastic pry tool, go along the edge of the device prying the device apart. While doing this, focus on the four clips, two of which are on either side of the device.

    번역하기

  6. Ring Video Doorbell Pro Housing Repalcement: 5 단계, 이미지 1/1

    • Remove the front of the device from the back plate.

    번역하기
결론

To reassemble your device, attach the new housing and follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Jake Dixon

회원 가입일: 11/09/17

835 평판

안내서 4개 작성하였습니다

배지: 11

배지 +8개 더

팀

IUPUI, Team S7-G4, Baechle Fall 2017 IUPUI, Team S7-G4, Baechle Fall 2017 회원

IUPUI-BAECHLE-F17S7G4

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 13

30일 전: 80

전체 시간: 22,909