이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Using a toothbrush, clean the entire cleat, especially where the shoe is ripped.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Squeeze out a good amount of the Shoe Goo onto the piece of printer paper.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Using the paint brush, paint the glue in the opening of the ripped cleat and between the leather and the sole of the cleat.
-
Let dry for 3 minutes and repeat the step again.
-
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Press the cleat together firmly and wrap a few pieces of newspaper around the sole of the shoe.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Wrap the adhesive tape around the newspaper tightly to keep pressure on the tear until the glue dries.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Use a hair dryer to slowly warm the newspaper surrounding the tear. Do this for 10 minutes, then let the shoe rest.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
After 24 hours, remove the tape and newspaper.
-
Then once the tape and newspaper are removed, peel off any excess glue that is stuck around the area of the rip.
-
다른 2명이 해당 안내서를 완성하였습니다.