소개
Before you start
Even though this process doesn't deal with any electrical connections, it is a good habit to unplug your Ryobi D620H drill before doing any work on it.
Removing the right side of the case is a prerequisite for all internal repairs.
필요한 것
-
-
All nine 16mm long Torx20 screws (Circled in red).
-
Turn the screwdriver counterclockwise to loosen the screws.
-
Remove all nine screws completely.
-
-
Replace the right-side case, simply reinsert all of the T20 screws and fasten them down completely.
Replace the right-side case, simply reinsert all of the T20 screws and fasten them down completely.
다른 한 분이 해당 안내서를 완성하였습니다.
팀
UMass Dartmouth, Team 1-2, Petersen Fall 2023 UMass Dartmouth, Team 1-2, Petersen Fall 2023 회원
UMASSD-PETERSEN-F23S1G2
4 회원들
안내서 6개 작성하였습니다
