기기를 수리하세요 커뮤니티 상점

Ryobi RJ1861V Motor Housing Replacement

필요한 것

  1. Ryobi RJ1861V Motor Housing Replacement, Trigger Assembly: 1 단계, 이미지 1/1

    • Use a Torx T20 screwdriver to remove the nine 16.5 mm screws around the trigger assembly.

    편집

  2. Ryobi RJ1861V Motor Housing Replacement: 2 단계, 이미지 1/2 Ryobi RJ1861V Motor Housing Replacement: 2 단계, 이미지 2/2

    • Use a Torx T20 screwdriver to remove the two 16.5 mm screws near the trigger.

    편집

  4. Ryobi RJ1861V Motor Housing Replacement, Motor Housing: 3 단계, 이미지 1/1

    • Use a Torx T20 bit or screwdriver to remove the six 19 mm screws securing the gear case cover.

    편집

  5. Ryobi RJ1861V Motor Housing Replacement: 4 단계, 이미지 1/2 Ryobi RJ1861V Motor Housing Replacement: 4 단계, 이미지 2/2

    • Use a Phillips #2 bit or screwdriver to remove the four 37 mm screws from the top and the bottom of the gear case.

    • Once these 4 screws are removed, you have access to the motor assembly.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 7

30일 전: 11

전체 시간: 124