주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

SG 552-1 Commando Motor Replacement

필요한 것

  1. SG 552-1 Commando Motor Replacement, Motor: 1 단계, 이미지 1/2 SG 552-1 Commando Motor Replacement, Motor: 1 단계, 이미지 2/2
    • Using a Phillips #0 screwdriver, remove the two 6mm screws located at the bottom of the hand grip.

    • Slide the cover off.

  2. SG 552-1 Commando Motor Replacement: 2 단계, 이미지 1/1
    • Pull the motor out from the inside of the hand grip.

    • Using a soldering iron and desoldering wick, desolder the wires from the motor.

  3. SG 552-1 Commando Motor Replacement: 3 단계, 이미지 1/1
    • Using a soldering iron, solder the wires onto the new motor.

결론

To reassemble your device, follow these instructions in reverse order.

Anika Morris

회원 가입일: 10/05/12

1 평판

안내서 4개 작성하였습니다

Cal Poly, Team 18-41, Regan Fall 2012 Cal Poly, Team 18-41, Regan Fall 2012 회원

CPSU-REGAN-F12S18G41

6 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 757