주요 콘텐츠로 건너뛰기

소개

Remotes can wear out easily, specifically the contacts between the silicon button pad and the circuit board.

To fix this, and extend the life of your device's remote, this guide will show you how to replace the circuit board.

부품

지정된 부품이 없습니다.

  1. SONY ZS-BTG900 Remote Motherboard Replacement, Remote Motherboard: 1 단계, 이미지 1/2 SONY ZS-BTG900 Remote Motherboard Replacement, Remote Motherboard: 1 단계, 이미지 2/2
    • Flip the remote and remove the backing.

  2. SONY ZS-BTG900 Remote Motherboard Replacement: 2 단계, 이미지 1/2 SONY ZS-BTG900 Remote Motherboard Replacement: 2 단계, 이미지 2/2
    • Locate the screw behind the battery pack.

    • Use a Phillips size 1 screwdriver to remove the 5/16in screw located inside the battery port.

  3. SONY ZS-BTG900 Remote Motherboard Replacement: 3 단계, 이미지 1/2 SONY ZS-BTG900 Remote Motherboard Replacement: 3 단계, 이미지 2/2
    • Use the plastic opening tool along the seam on the side of the remote until you hear a click. This means that the plastic tabs holding the remote together are coming loose.

    • Do this until the top half of the remote comes loose.

  4. SONY ZS-BTG900 Remote Motherboard Replacement: 4 단계, 이미지 1/2 SONY ZS-BTG900 Remote Motherboard Replacement: 4 단계, 이미지 2/2
    • Carefully remove the top to reveal the button covers and the remote control board.

  5. SONY ZS-BTG900 Remote Motherboard Replacement: 5 단계, 이미지 1/2 SONY ZS-BTG900 Remote Motherboard Replacement: 5 단계, 이미지 2/2
    • Lift the chip out of the plastic casing to replace it.

결론

To reassemble your device, follow these instructions in reverse order.

Alfredo Rodriguez

회원 가입일: 2016년 04월 11일

969 평판

안내서 8개 작성하였습니다

0 Comments

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 342