기기를 수리하세요 커뮤니티 상점

Samsung 27E510C NAV Button Replacement

소개

The JOG button is used to control monitor functions like volume, brightness, and contrast. Common issues of this feature include the button sticking and the control stick breaking off.

필요한 것

  1. Samsung 27E510C NAV Button Replacement, Back Panel: 1 단계, 이미지 1/3 Samsung 27E510C NAV Button Replacement, Back Panel: 1 단계, 이미지 2/3 Samsung 27E510C NAV Button Replacement, Back Panel: 1 단계, 이미지 3/3

    • Use the #1 Phillips head screw driver to remove each 13.75mm length screw from the rear panel.

    • The screw alone with the ports is a different size than the rest, its length is 12mm.

    번역하기

  2. Samsung 27E510C NAV Button Replacement: 2 단계, 이미지 1/2 Samsung 27E510C NAV Button Replacement: 2 단계, 이미지 2/2

    • Insert the heavy duty spudger in between the monitors back panel and its frame.

    • Use the heavy duty spudger to pry open the back panel.

    • Over aggressive prying could break the tabs holding the back panel in place.

    번역하기

  3. Samsung 27E510C NAV Button Replacement, Rear navigation button: 3 단계, 이미지 1/1

    • Carefully remove the tape holding down the connector wire.

    • You will need to re-attach the tape upon reassembly.

    번역하기

  5. Samsung 27E510C NAV Button Replacement: 4 단계, 이미지 1/1

    • Disconnect the navigation button from the motherboard by holding down the thumb tab and pulling its connector out.

    번역하기

  6. Samsung 27E510C NAV Button Replacement: 5 단계, 이미지 1/2 Samsung 27E510C NAV Button Replacement: 5 단계, 이미지 2/2

    • Remove the navigation buttons connector wire from the monitors body tab.

    번역하기

  7. Samsung 27E510C NAV Button Replacement: 6 단계, 이미지 1/1

    • With one thumb, hold down the tab on the bottom of the navigation buttons base.

    • While holding the tab down, lift the base of the navigation button with your other hand.

    번역하기

  8. Samsung 27E510C NAV Button Replacement: 7 단계, 이미지 1/3 Samsung 27E510C NAV Button Replacement: 7 단계, 이미지 2/3 Samsung 27E510C NAV Button Replacement: 7 단계, 이미지 3/3

    • Remove the connector wire from the defective navigation button by first gripping its connectors thumb tab.

    • While gripping the thumb tab, pull the connector from the base of the navigation button.

    • You can save the connector wire since it may not be defective.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

giggythore

회원 가입일: 10/14/17

366 평판

안내서 3개 작성하였습니다

배지: 13

배지 +10개 더

팀

Cal Poly, Team S9-G1, Banghart Fall 2017 Cal Poly, Team S9-G1, Banghart Fall 2017 회원

CPSU-BANGHART-F17S9G1

6 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 5

전체 시간: 455