주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

The back panel is the "lid" that covers many of the monitors electrical components. Therefore this is a prerequisite for most of the other repair guides on this device.

부품

지정된 부품이 없습니다.

  1. Use the #1 Phillips head screw driver to remove each 13.75mm length screw from the rear panel. The screw alone with the ports is a different size than the rest, its length is 12mm. The screw alone with the ports is a different size than the rest, its length is 12mm.
    • Use the #1 Phillips head screw driver to remove each 13.75mm length screw from the rear panel.

    • The screw alone with the ports is a different size than the rest, its length is 12mm.

  2. Manta(만타) 드라이버 키트

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta(만타) 드라이버 키트

    Upgrade Your Toolbox
  3. Insert the heavy duty spudger in between the monitors back panel and its frame. Use the heavy duty spudger to pry open the back panel.
    • Insert the heavy duty spudger in between the monitors back panel and its frame.

    • Use the heavy duty spudger to pry open the back panel.

    • Over aggressive prying could break the tabs holding the back panel in place.

결론

To reassemble your device, follow these instructions in reverse order.

giggythore

회원 가입일: 2017년 10월 14일

329 평판

안내서 3개 작성하였습니다

Cal Poly, Team S9-G1, Banghart Fall 2017 Cal Poly, Team S9-G1, Banghart Fall 2017 회원

CPSU-BANGHART-F17S9G1

6 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 19

전체 시간: 455