주요 콘텐츠로 건너뛰기

Samsung A3 2016 Model - A310F Display / LCD Replacement

필요한 것

  1. Samsung A3 2016 Model - A310F Display / LCD Replacement, Display / LCD: 1 단계, 이미지 1/1
    • Remove the SIM tray from the phone.

  2. Samsung A3 2016 Model - A310F Display / LCD Replacement, Removing the battery cover: 2 단계, 이미지 1/1
    • Use a heat gun or iOpener to heat the back of the phone.

    • Insert a spudger or thin bladed tool between the batery cover and frame.

    • Slide all the way around to release the adhesive holding the cover.

    • The battery cover is also glass and can break if too much pressure is applied when removeing.

  3. Samsung A3 2016 Model - A310F Display / LCD Replacement: 3 단계, 이미지 1/2 Samsung A3 2016 Model - A310F Display / LCD Replacement: 3 단계, 이미지 2/2
    • Remove all 16 screws from the housing

  4. Samsung A3 2016 Model - A310F Display / LCD Replacement: 4 단계, 이미지 1/1
    • Hold the edge of the housing and push on the battery to release the display and mainboard from the housing.

    • You may need to go around the edge of the glass with a pick to remove any remaining adhesive

  5. Samsung A3 2016 Model - A310F Display / LCD Replacement: 5 단계, 이미지 1/1
    • Remove the Philips screw securing the mainboard.

    • Remove the cable attached to the mainboard

    • Disconnect the display and camera connectors from the mainboard

  6. Samsung A3 2016 Model - A310F Display / LCD Replacement: 6 단계, 이미지 1/2 Samsung A3 2016 Model - A310F Display / LCD Replacement: 6 단계, 이미지 2/2
    • Disconnect the daughter board from the mainboard

  7. Samsung A3 2016 Model - A310F Display / LCD Replacement: 7 단계, 이미지 1/1
    • Using a heatgun, heat the front of the display.

    • Use a spudger or pick to work the display and LCD free from the plastic housing. NOTE: The LCD is also glued to the frame and will probably break as well.

    • When mounting the new display, the display cable slots through a gap in the plastic frame and attaches to the mainboard.

  8. Samsung A3 2016 Model - A310F Display / LCD Replacement: 8 단계, 이미지 1/3 Samsung A3 2016 Model - A310F Display / LCD Replacement: 8 단계, 이미지 2/3 Samsung A3 2016 Model - A310F Display / LCD Replacement: 8 단계, 이미지 3/3
    • Reattach the daughter board connector to the mainboard.

    • When re-inserting the mainboard, use a plastic spudger to push the battery pins in so the mainboard sits properly in the frame and the pins make a good contact with the battery.

    • Re-connect the display connector, camera and cable to the mainboard.

    • Screw the mainboard to the frame

  9. Samsung A3 2016 Model - A310F Display / LCD Replacement: 9 단계, 이미지 1/1
    • Turn the phone on and test the display before removing the adhesive on the back of the display.

    • If everything works, remove the adhesive and attach the display to the plastic frame.

    • Push the display into the metal housing so it fits snugly.

  10. Samsung A3 2016 Model - A310F Display / LCD Replacement: 10 단계, 이미지 1/2 Samsung A3 2016 Model - A310F Display / LCD Replacement: 10 단계, 이미지 2/2
    • Replace the 16 screws that were removed in step 3.

    • Replace the battery cover and you are done.

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

Harvey

회원 가입일: 02/15/16

5,193 평판

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 15

전체 시간: 3,526