주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

A guide on how to replace a damaged DC power board on a Samsung BD-7500.

부품

지정된 부품이 없습니다.

  1. Remove the three 10mm screws with a Phillips #0 screwdriver.
    • Remove the three 10mm screws with a Phillips #0 screwdriver.

    • Pry the top off with a plastic opening tool.

  2. Remove the three screws holding down the cover with a Phillips #0 screwdriver.
    • Remove the three screws holding down the cover with a Phillips #0 screwdriver.

  3. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  4. Lift up the power cord at its base to remove it.
    • Lift up the power cord at its base to remove it.

  5. Insert a plastic opening tool into the black plastic tab on the cord and twist to separate.
    • Insert a plastic opening tool into the black plastic tab on the cord and twist to separate.

  6. Remove the 7mm screw with a Phillips #1 screwdriver.
    • Remove the 7mm screw with a Phillips #1 screwdriver.

    • Grip the blue tab attached to the base and pull upwards.

  7. Grip the edges of the motherboard and pull upwards to remove.
    • Grip the edges of the motherboard and pull upwards to remove.

결론

To reassemble your device, follow these instructions in reverse order.

samer odeh

회원 가입일: 2018년 02월 13일

313 평판

안내서 1개 작성함

USF Tampa, Team S16-G4, Boczar Spring 2018 USF Tampa, Team S16-G4, Boczar Spring 2018 회원

USFT-BOCZAR-S18S16G4

4 회원들

안내서 4개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 174