난이도
Moderate
단계
4
소요 시간
시간 제안??
- Fuser Unit 4 단계
더 나은 이미지가 필요함
더 나은 사진은 해당 안내서를 향상시킬 것입니다. 사진 촬영, 편집, 또는 새로운 업로드를 도와주십시오!
소개
Follow these steps to replace the fuser unit by taking off the back cover of your Samsung CLP-300.
필요한 것
-
-
Turn the printer off and wait a few minutes for it to cool.
-
Turn printer around so that you are looking at the rear panel.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 2명이 해당 안내서를 완성하였습니다.
팀
University of Maine, Team 1-1, Diaz Fall 2014 University of Maine, Team 1-1, Diaz Fall 2014 회원
UMAINE-DIAZ-F14S1G1
3 회원들
안내서 4개 작성하였습니다
2 Comments
how do you unplug the old fuser unit and plug in the new fuser unit - you don’t show how to do that.
The plug in on the left side, no need to unplug it because it is part of the fuser unit.
