Samsung DV180F Repair Back control buttons Replacement

소개

This guide shows how to replace the back buttons panel of a Samsung DV180F when damaged. This procedure is very simple since the device is not entirely disassembled. It only involes loosening a few screws and unpluging the connecting ribbons.

필요한 것

1 단계 Back Buttons Panel

Samsung DV180F Repair Back control buttons Replacement, Back Buttons Panel: 1 단계, 이미지 1/2

Samsung DV180F Repair Back control buttons Replacement, Back Buttons Panel: 1 단계, 이미지 2/2

Ensure the camera is turned off and battery is taken out before you begin.
Remove the two external screws from the camera using a Phillips 000 screwdriver.

편집

2 단계

Insert a plastic opening tool in the gap between the camera body and back panel.
Pry along the right side of the camera to separate the back panel.

편집

3 단계

Once the camera is open, remove the two internal screws using a Phillips 000 screwdriver.

편집

4 단계

Use a plastic opening tool to release the lock securing the ribbon receptor to the right side of the motherboard.
Ribbons have to be unlocked before removal to prevent damage.

편집