부품

부품은 필요하지 않습니다.

  1. Open the tray by pressing the eject button
    • Open the tray by pressing the eject button

    • Remove the DVD tray faceplate by pushing the faceplate up off of the tray.

    댓글 쓰기

  2. Press the eject button to insert the tray
    • Press the eject button to insert the tray

    • After the tray is closed unplug DVD player

    댓글 쓰기

    • Unscrew the 3 screws in the back.

    댓글 쓰기

    • Pull the outer case upward and then towards you.

    댓글 쓰기

    • There are six symmetrically placed tabs holding in the front faceplate. Unhook these six tabs to loosen the faceplate.

    댓글 쓰기

    • Pull off front faceplate. This may take a couple of tries to get all six tabs unhooked simultaneously.

    댓글 쓰기

    • Locate the white clip that attaches the cord to the motherboard

    • Grasp clip and squeeze to release

    • Lift up and remove power cord

    • Slide cord mount from outer case

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Evan Domingue

회원 가입일: 2011년 01월 28일

398 평판

안내서 3개 작성하였습니다

Cal Poly, Team 3-30, Regan Winter 2011 Cal Poly, Team 3-30, Regan Winter 2011 회원

CPSU-REGAN-W11S3G30

4 회원들

안내서 8개 작성하였습니다

where can I get a replacement cord?

Bill Cavanaugh - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 3

지난 30일: 13

전체 시간: 2,765