주요 콘텐츠로 건너뛰기

Samsung Eternity Digitizer and Screen Replacement

필요한 것

    • Remove the back battery cover.

  1. Samsung Eternity Digitizer and Screen Replacement: 2 단계, 이미지 1/1
    • Using the Phillips #00 screwdriver, remove the phone's battery.

  2. Samsung Eternity Digitizer and Screen Replacement: 3 단계, 이미지 1/1
    • Remove six (4.28 x 1.25)mm screws using the Phillips #00 screwdriver

  3. Samsung Eternity Digitizer and Screen Replacement: 4 단계, 이미지 1/2 Samsung Eternity Digitizer and Screen Replacement: 4 단계, 이미지 2/2
    • Continuing to use the Phillips #00 screwdriver, gently pry the silver plastic back plate from the body of the phone.

  4. Samsung Eternity Digitizer and Screen Replacement, Motherboard: 5 단계, 이미지 1/1
    • It is very easy to rip motherboard cables and damage fragile motherboard clips. Be careful when you are removing every component.

    • Pull the antenna plug out of its socket.

  5. Samsung Eternity Digitizer and Screen Replacement: 6 단계, 이미지 1/3 Samsung Eternity Digitizer and Screen Replacement: 6 단계, 이미지 2/3 Samsung Eternity Digitizer and Screen Replacement: 6 단계, 이미지 3/3
    • Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out.

  6. Samsung Eternity Digitizer and Screen Replacement: 7 단계, 이미지 1/1
    • Pop the red hinged-release lever away from its ribbon. Then pull it out.

  7. Samsung Eternity Digitizer and Screen Replacement: 8 단계, 이미지 1/1
    • Peel the button sensor on the side of the motherboard off of the case.

  8. Samsung Eternity Digitizer and Screen Replacement: 9 단계, 이미지 1/3 Samsung Eternity Digitizer and Screen Replacement: 9 단계, 이미지 2/3 Samsung Eternity Digitizer and Screen Replacement: 9 단계, 이미지 3/3
    • Slightly pull up one side of the motherboard.

    • Pull the button/microphone plug out of its socket.

    • Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

  9. Samsung Eternity Digitizer and Screen Replacement: 10 단계, 이미지 1/1
    • You have successfully removed the motherboard from the phone.

  10. Samsung Eternity Digitizer and Screen Replacement, Digitizer and Screen: 11 단계, 이미지 1/1
    • Flip phone over so you are looking at the front screen of the phone. (The back is already taken off and parts removed)

  11. Samsung Eternity Digitizer and Screen Replacement: 12 단계, 이미지 1/3 Samsung Eternity Digitizer and Screen Replacement: 12 단계, 이미지 2/3 Samsung Eternity Digitizer and Screen Replacement: 12 단계, 이미지 3/3
    • Use a small tool to pry the digitizer and screen (together) from the frame of the phone. This may take some time and careful work because it is glued down to the frame.

    • Be careful when you pull the lower part of this piece away from the phone frame because there is a ribbon attached to the digitizer that you don't want to break. There is also a ribbon on the side of the screen to be aware of.

  12. Samsung Eternity Digitizer and Screen Replacement: 13 단계, 이미지 1/3 Samsung Eternity Digitizer and Screen Replacement: 13 단계, 이미지 2/3 Samsung Eternity Digitizer and Screen Replacement: 13 단계, 이미지 3/3
    • Next, carefully pull the digitizer away from the screen.

    • At this point you can replace either the screen or the digitizer.

    • Cleaning the screen with a glass cleaning cloth before reassembling will remove any smudges or fingerprints from disassembling the device.

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Heather Behrend

회원 가입일: 04/20/11

133 평판

안내서 1개 작성함

Cal Poly, Team 15-11, Regan Spring 2011 Cal Poly, Team 15-11, Regan Spring 2011 회원

CPSU-REGAN-S11S15G11

5 회원들

안내서 14개 작성하였습니다

댓글 3개

You did not mention how to glue the digitizer to LCD. That is a very important step.

cashyapan - 답글

Do these steps also work for the Samsung Eternity 2?

Brian Coukis The 90's Kid! - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 9

전체 시간: 6,835