주요 콘텐츠로 건너뛰기

Samsung Eternity Input Jack Replacement

필요한 것

    • Remove the back battery cover.

  1. Samsung Eternity Input Jack Replacement: 2 단계, 이미지 1/1
    • Using the Phillips #00 screwdriver, remove the phone's battery.

  2. Samsung Eternity Input Jack Replacement: 3 단계, 이미지 1/1
    • Remove six (4.28 x 1.25)mm screws using the Phillips #00 screwdriver

  3. Samsung Eternity Input Jack Replacement: 4 단계, 이미지 1/2 Samsung Eternity Input Jack Replacement: 4 단계, 이미지 2/2
    • Continuing to use the Phillips #00 screwdriver, gently pry the silver plastic back plate from the body of the phone.

  4. Samsung Eternity Input Jack Replacement, Input Jack: 5 단계, 이미지 1/1
    • Peel off the Identification sticker

  5. Samsung Eternity Input Jack Replacement: 6 단계, 이미지 1/1
    • Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

  6. Samsung Eternity Input Jack Replacement: 7 단계, 이미지 1/1
    • Pop the speaker plug out of its socket.

  7. Samsung Eternity Input Jack Replacement: 8 단계, 이미지 1/1
    • Peel the button sensor off the top of the case.

  8. Samsung Eternity Input Jack Replacement: 9 단계, 이미지 1/1
    • Peel the Input jack assembly out of the case.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Sven

회원 가입일: 04/18/11

52 평판

안내서 1개 작성함

Cal Poly, Team 15-11, Regan Spring 2011 Cal Poly, Team 15-11, Regan Spring 2011 회원

CPSU-REGAN-S11S15G11

5 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,449