메인 콘텐츠로 스킵하기

부품

지정된 부품이 없습니다.

  1. Begin removing the 3/16" screws for the device.
    • Begin removing the 3/16" screws for the device.

  2. Turn the device and remove the additional 3/16" screws.
    • Turn the device and remove the additional 3/16" screws.

  3. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  4. Turn the device and remove the additional 3/16" screw.
    • Turn the device and remove the additional 3/16" screw.

  5. Take the white cover plate off. Take the white cover plate off. Take the white cover plate off.
    • Take the white cover plate off.

  6. Using the plastic opening tools, pry open the camera from the bottom.
    • Using the plastic opening tools, pry open the camera from the bottom.

    • This may require a moderate use of force because of the sealing glue.

  7. Gently pull the connector away from the motherboard.
    • Gently pull the connector away from the motherboard.

    Help! I can't get this connector back in place! How did you do it?

    Thanks!

    rotraut geringer - 답글

    Got it finally - and it's working again, I can't believe it! Thank you so much for the instructions!!!!

    rotraut geringer - 답글

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

Richard Hicks

회원 가입일: 2015년 01월 13일

1,213 평판

안내서 4개 작성하였습니다

USF Tampa, Team 1-3, Sullivan Winter 2015 USF Tampa, Team 1-3, Sullivan Winter 2015 회원

USFT-SULLIVAN-W15S1G3

3 회원들

안내서 4개 작성하였습니다

Fix cannot connect to camera error

Robert Spencer - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 878