주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Replace the glass digitizer and the LCD screen.

  1. Starting from the indent, use a finger nail or guitar pick to separate the back from the body of the phone. Starting from the indent, use a finger nail or guitar pick to separate the back from the body of the phone.
    • Starting from the indent, use a finger nail or guitar pick to separate the back from the body of the phone.

  2. Once the cover is removed you'll find the battery that reads "SAMSUNG" Use a fingernail or a plastic tool such as a guitar pick to lift up on the bottom indent of the battery. Do not use metal tool as it can be dangerous.
    • Once the cover is removed you'll find the battery that reads "SAMSUNG"

    • Use a fingernail or a plastic tool such as a guitar pick to lift up on the bottom indent of the battery.

    • Do not use metal tool as it can be dangerous.

  3. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  4. Use a plastic tool to pop out piece shown. Use a plastic tool to pop out piece shown.
    • Use a plastic tool to pop out piece shown.

  5. Detach the screen connector.
    • Detach the screen connector.

  6. Use a blower dryer or heating pad to heat up the screen. If this step is skipped it may result in a broken screen and/or LCD.
    • Use a blower dryer or heating pad to heat up the screen.

    • If this step is skipped it may result in a broken screen and/or LCD.

    • This is done to loosen the glue holding the screen in place.

  7. Use a thin plastic tool such as a guitar pick or plastic prying tool to lift out the glass digitizer and LCD screen around the edges. Do this slowly and carefully as both parts can crack very easily. Make sure your tool is plastic as a metal tool can damage the screen.
    • Use a thin plastic tool such as a guitar pick or plastic prying tool to lift out the glass digitizer and LCD screen around the edges.

    • Do this slowly and carefully as both parts can crack very easily.

    • Make sure your tool is plastic as a metal tool can damage the screen.

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

Mack Johnson

회원 가입일: 2018년 04월 05일

884 평판

안내서 6개 작성하였습니다

My friend set on his phone the screen is broken. The phone will come on but the screen will not light up.

Rudolph Mc Alister - 답글

Same! For TWO phones now… have you had any luck on any suggestions or figuring anything out???

Faith Dockery -

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 8

30일 전: 27

전체 시간: 2,422