주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

You will be learning how to replace the motherboard.

  1. Locate the small indent in the top of the device and use your nails or a spudger to separate the cover from the mid-frame. Locate the small indent in the top of the device and use your nails or a spudger to separate the cover from the mid-frame.
    • Locate the small indent in the top of the device and use your nails or a spudger to separate the cover from the mid-frame.

  2. Locate the indent on the bottom left corner of the battery compartment. Use your fingers or the plastic opening tool to lift the battery from the device. Locate the indent on the bottom left corner of the battery compartment. Use your fingers or the plastic opening tool to lift the battery from the device.
    • Locate the indent on the bottom left corner of the battery compartment. Use your fingers or the plastic opening tool to lift the battery from the device.

  3. LCD iPhone 스크린 수리 키트

    평생 품질 보증이 적용되는 저렴한 옵션.

    키트 쇼핑하기

    LCD iPhone 스크린 수리 키트

    수리의 질 말고 비용을 절감하세요.

    키트 쇼핑하기
  4. Remove the five 3mm screws along the top and bottom edges of the device with the Philips #00 screwdriver. One of these will be hidden under a piece of reflective foil. Breaking this will void the warranty. Use the plastic removal tool to work pry the mid-frame from the device.
    • Remove the five 3mm screws along the top and bottom edges of the device with the Philips #00 screwdriver.

    • One of these will be hidden under a piece of reflective foil. Breaking this will void the warranty.

    • Use the plastic removal tool to work pry the mid-frame from the device.

    • This may take some effort, so try working around the edges slowly as to not break anything.

  5. Locate the two ribbon cable connections on the motherboard. GENTLY use the pointed end of the spudger to disconnect the cables. Lift the motherboard out of the phone. Locate the two ribbon cable connections on the motherboard. GENTLY use the pointed end of the spudger to disconnect the cables. Lift the motherboard out of the phone. Locate the two ribbon cable connections on the motherboard. GENTLY use the pointed end of the spudger to disconnect the cables. Lift the motherboard out of the phone.
    • Locate the two ribbon cable connections on the motherboard. GENTLY use the pointed end of the spudger to disconnect the cables. Lift the motherboard out of the phone.

  6. Using your fingers or a plastic opening tool, carefully lift the motherboard assembly from the phone.
    • Using your fingers or a plastic opening tool, carefully lift the motherboard assembly from the phone.

  7. On the front face of the motherboard, locate the two #00 Phillips head screws. These hold the SIM card chassis in place. Keep these screws separate from the back plate screws.
    • On the front face of the motherboard, locate the two #00 Phillips head screws. These hold the SIM card chassis in place.

    • Keep these screws separate from the back plate screws.

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

Taylor

회원 가입일: 2015년 01월 30일

1,165 평판

안내서 5개 작성하였습니다

USF Tampa, Team 16-6, Watkins Winter 2015 USF Tampa, Team 16-6, Watkins Winter 2015 회원

USFT-WATKINS-W15S16G6

2 회원들

안내서 5개 작성하였습니다

How to jumper network problem

Kshitiz khadka - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 9

전체 시간: 991