이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
You must open the back of the phone to access the battery. To do this use the plastic opening tools or your fingernail and insert it into the divot.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove the back cover of the phone by moving the prying tool or your fingernail away from the phone while it is still in the divot.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Insert your finger into the divot of the battery and pull the battery towards yourself to remove.
-
This is when a new battery will be inserted.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove 4.4 mm screws using a PH # 000 as indicated on the picture.
This is something that cannot be fixed. Due to it being a prerequisite guide it comes up with the title of the guide itself as it is inserted as a prerequisite guide.
-
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
After removing the screws be sure to turn the phone right side up.
-
Insert your plastic opening tool between the screen and the outer case. Move the opening tool around the phone without removing it from in between the screen and the shell of the phone.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Unscrew 4.4mm with a PH #000 marked screw.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove the internal battery using tweezers or your flat head screw driver.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Peel the display connector strip off the main circuit board using the tweezers.
-
Peel the USB connector strip off the main circuit board using the tweezers.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Using tweezers, pull the top circuit board off.
-
다른 4명이 해당 안내서를 완성하였습니다.
댓글 2개
were i can find mother board i need the mother board