Skip to main content
  1. Insert an opening pick between the rear case and the plastic rim. You may need to add multiple picks to detach the clips.
    • Insert an opening pick between the rear case and the plastic rim.

    • You may need to add multiple picks to detach the clips.

    • Slide the pick along the edge of the rear case until you release the plastic clips attaching the rear case to the display.

    • Continue to slide the pick around the edge of the rear case until all clips are released.

  2. Lift the case up to remove it. Lift the case up to remove it.
    • Lift the case up to remove it.

  3. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  4. Lift the plastic frame to remove.
    • Lift the plastic frame to remove.

    • Avoid the three delicate ribbon cables.

  5. Use the flat end of a plastic spudger to pry up the press-fit connector from the motherboard. Remove the camera by gently pulling upward with a pair of tweezers. Remove the camera by gently pulling upward with a pair of tweezers.
    • Use the flat end of a plastic spudger to pry up the press-fit connector from the motherboard.

    • Remove the camera by gently pulling upward with a pair of tweezers.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Corey Brown

회원 가입일: 2016년 06월 24일

4,901 평판

안내서 11개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 10

전체 시간: 520