소개
Follow this guide to bring the sound back to your headphones by replacing the auxiliary port.
필요한 것
-
-
Heat up an iOpener for 30 seconds and place on all four seams of the screen. A heat gun can be used as well.
-
-
-
-
This is where the auxiliary port is located.
-
Remove the black 3mm screw using a PH000 Phillips screwdriver.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.