주요 콘텐츠로 건너뛰기

Samsung Galaxy Watch Display Replacement

필요한 것

  1. Samsung Galaxy Watch Display Replacement, Opening Procedure: 1 단계, 이미지 1/1
    • Remove the four Tri-point #00 screws (4.2 mm length) on the backside of the watch.

  2. Samsung Galaxy Watch Display Replacement: 2 단계, 이미지 1/2 Samsung Galaxy Watch Display Replacement: 2 단계, 이미지 2/2
    • Use an opening tool to get between the back cover and the metal housing of the watch.

    • Carefully pry the plastic back cover open.

    • Don't remove the back cover yet. There is a flex cable running to the core assembly inside.

  3. Samsung Galaxy Watch Display Replacement: 3 단계, 이미지 1/2 Samsung Galaxy Watch Display Replacement: 3 단계, 이미지 2/2
    • Lay down the watch and lift the back cover to access the sensor connector on the motherboard.

  4. Samsung Galaxy Watch Display Replacement: 4 단계, 이미지 1/2 Samsung Galaxy Watch Display Replacement: 4 단계, 이미지 2/2
    • Use a spudger to disconnect the sensor flex cable from the motherboard.

  5. Samsung Galaxy Watch Display Replacement: 5 단계, 이미지 1/3 Samsung Galaxy Watch Display Replacement: 5 단계, 이미지 2/3 Samsung Galaxy Watch Display Replacement: 5 단계, 이미지 3/3
    • Remove the back cover.

    • When closing the watch make sure the rubber gasket is undamaged or replace it with a new one.

  6. Samsung Galaxy Watch Display Replacement, Core Assembly Removal: 6 단계, 이미지 1/2 Samsung Galaxy Watch Display Replacement, Core Assembly Removal: 6 단계, 이미지 2/2
    • Use a spudger to disconnect the display flex cable from the motherboard.

  7. Samsung Galaxy Watch Display Replacement: 7 단계, 이미지 1/2 Samsung Galaxy Watch Display Replacement: 7 단계, 이미지 2/2
    • Lift the core unit out of the housing.

    • The core's plastic frame sits tight inside the housing.

    • Carefully thread the display flex cable through the gap of the core's plastic frame.

  8. Samsung Galaxy Watch Display Replacement, Display: 8 단계, 이미지 1/1
    • If necessary apply some tape over the display to avoid any injury from glass shards.

  9. Samsung Galaxy Watch Display Replacement: 9 단계, 이미지 1/2 Samsung Galaxy Watch Display Replacement: 9 단계, 이미지 2/2
    • Use your finger or thumb to steadily push down on the display to loosen the adhesive.

    • Heating the display with a hair dryer or iOpener helps softening the adhesive.

    • Remove the display.

결론

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

다른 8명이 해당 안내서를 완성하였습니다.

Tobias Isakeit

회원 가입일: 03/31/14

116,710 평판

안내서 188개 작성하였습니다

Master Techs Master Techs 회원

Community

322 회원들

안내서 2,506개 작성하였습니다

댓글 한 개

Hi does this process work with the galaxy 5 watch?

Rey Thomas Jude Ho - 답글

댓글 쓰기

조회 통계:

24 시간 전: 39

7일 전: 254

30일 전: 1,147

전체 시간: 50,079