주요 콘텐츠로 건너뛰기

소개

This guide shall detail and illustrate how to replace the motherboard for a Samsung Galaxy Y.

  1. Use the blue plastic opening tool to pry the back-panel off of the device. Use the blue plastic opening tool to pry the back-panel off of the device. Use the blue plastic opening tool to pry the back-panel off of the device.
    • Use the blue plastic opening tool to pry the back-panel off of the device.

  2. Use a Phillips #000 screwdriver to remove the four 5mm screws located in the corner of the interior back panel. Remove the SD card as well by sliding the card out of its slot. Remove the SD card as well by sliding the card out of its slot.
    • Use a Phillips #000 screwdriver to remove the four 5mm screws located in the corner of the interior back panel.

    • Remove the SD card as well by sliding the card out of its slot.

  3. 안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기

    안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기
  4. Use the metal pry tool to separate the interior back panel from the interior hardware and screen. Use the metal pry tool to separate the interior back panel from the interior hardware and screen.
    • Use the metal pry tool to separate the interior back panel from the interior hardware and screen.

  5. Disconnect the orange motherboard connection, then remove the interior hardware from the front screen display. Disconnect the orange motherboard connection, then remove the interior hardware from the front screen display. Disconnect the orange motherboard connection, then remove the interior hardware from the front screen display.
    • Disconnect the orange motherboard connection, then remove the interior hardware from the front screen display.

  6. Use a Phillips #000 screwdriver to remove the five 2mm screws located in the corner of the silver protective panel. If the motherboard is cracked or damaged, then replace with a new one. If the motherboard is cracked or damaged, then replace with a new one.
    • Use a Phillips #000 screwdriver to remove the five 2mm screws located in the corner of the silver protective panel.

    • If the motherboard is cracked or damaged, then replace with a new one.

결론

To reassemble your device, follow these instructions in reverse order.

Peggi Trask

회원 가입일: 2018년 09월 21일

109 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 165