메뉴

설정

Samsung Gear S3 Frontier Speaker Replacement

작성자 Jimmy Algeo (또 다른 기여자 4명)
  • 댓글 1
  • 즐겨찾기 1

난이도

보통

단계

12

소요 시간

45 분 - 1 시간

섹션

5

플래그

0

소개

If sound from your speaker is muffles or not working at all, use this guide to replace it.

  1. Place the watch screen-down so that its back cover is showing.

    • Place the watch screen-down so that its back cover is showing.

    편집

  2. Remove the four 4.2mm screws with a Y00 screwdriver. Remove the four 4.2mm screws with a Y00 screwdriver.

    • Remove the four 4.2mm screws with a Y00 screwdriver.

    편집

  3. Wedge the metal spudger in between the back cover and the frame along the seam. Use force to pry the back cover away from the main watch frame. This step requires a lot of force. You can use a Jimmy in place of a metal spudger to make the process easier.

    • Wedge the metal spudger in between the back cover and the frame along the seam.

    • Use force to pry the back cover away from the main watch frame.

    • This step requires a lot of force. You can use a Jimmy in place of a metal spudger to make the process easier.

    • This step will ruin the water-proof seal.

    편집

  4. Detach the three connectors on the motherboard using your fingernail. The connectors are easy to pop off. Minimal force is necessary. The connectors are easy to pop off. Minimal force is necessary.

    • Detach the three connectors on the motherboard using your fingernail.

    • The connectors are easy to pop off. Minimal force is necessary.

    편집

  6. Separate the motherboard and front screen assembly using a spudger. Separate the motherboard and front screen assembly using a spudger. Separate the motherboard and front screen assembly using a spudger.

    • Separate the motherboard and front screen assembly using a spudger.

    편집

  7. Using a JIS #00 screwdriver, remove the two 4.5 mm screws. Using a JIS #00 screwdriver, remove the two 4.5 mm screws.

    • Using a JIS #00 screwdriver, remove the two 4.5 mm screws.

    편집

  8. Disconnect the battery ribbon cable from bracket. Separate the chassis from the motherboard. Be careful with the battery ribbon cable, as it is very easy to break (ours did when disassembling).

    • Disconnect the battery ribbon cable from bracket.

    • Separate the chassis from the motherboard.

    • Be careful with the battery ribbon cable, as it is very easy to break (ours did when disassembling).

    • Note how the end of the ribbon cable seats in the plastic chassis. Look for the plastic pin on the chassis when re-seating.

    편집

  9. Separate the battery from the motherboard. The battery and the motherboard are secured with adhesive; some force is needed.

    • Separate the battery from the motherboard.

    • The battery and the motherboard are secured with adhesive; some force is needed.

    • Lithium-ion batteries are potentially dangerous. Handle with extreme care and do not puncture the battery.

    편집

  10. Remove the battery's cable from the chassis using tweezers. Remove the battery's cable from the chassis using tweezers. Remove the battery's cable from the chassis using tweezers.

    • Remove the battery's cable from the chassis using tweezers.

    편집

  11. Remove the single 3.9mm screw with a JIS #000 screwdriver. Remove the single 3.9mm screw with a JIS #000 screwdriver.

    • Remove the single 3.9mm screw with a JIS #000 screwdriver.

    편집

  12. Separate the two parts of the chassis. The speaker is located on the bulkier half of the chassis (see third image). The speaker is located on the bulkier half of the chassis (see third image).

    • Separate the two parts of the chassis.

    • The speaker is located on the bulkier half of the chassis (see third image).

    편집

  13. Remove the connection from the chassis with tweezers. Attempting to remove the connection by grabbing the speaker itself may result in damage to the speaker and it's connection.

    • Remove the connection from the chassis with tweezers.

    • Attempting to remove the connection by grabbing the speaker itself may result in damage to the speaker and it's connection.

    • Separate the speaker from the chassis.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Jimmy Algeo

회원 가입일: 2018년 10월 08일

427 평판

안내서 2개 작성하였습니다

배지: 10

배지 +7개 더

팀

Cal Poly, Team S15-G2, White Fall 2018 Cal Poly, Team S15-G2, White Fall 2018 회원

CPSU-WHITE-F18S15G2

4 회원들

안내서 24개 작성하였습니다

댓글 0개

의견 추가하세요

댓글 쓰기

조회 통계:

24 시간 전: 9

7일 전: 38

30일 전: 159

전체 시간: 1,649