기기를 수리하세요 커뮤니티 상점

Samsung Gear VR with Controller Motherboard Replacement

소개

If the buttons on your controller are not responding, use this guide to replace the motherboard in your controller. This replacement requires a metal spudger, iFixit opening tool, and Phillips #000 screwdriver.

필요한 것

  1. Samsung Gear VR with Controller Motherboard Replacement, Controller Batteries: 1 단계, 이미지 1/3 Samsung Gear VR with Controller Motherboard Replacement, Controller Batteries: 1 단계, 이미지 2/3 Samsung Gear VR with Controller Motherboard Replacement, Controller Batteries: 1 단계, 이미지 3/3

    • Turn the controller upside down to access the battery compartment.

    • The battery compartment is located on the opposite side of the buttons.

    • Press on the top of the battery plate and slide down to remove the cover.

    편집

  2. Samsung Gear VR with Controller Motherboard Replacement: 2 단계, 이미지 1/3 Samsung Gear VR with Controller Motherboard Replacement: 2 단계, 이미지 2/3 Samsung Gear VR with Controller Motherboard Replacement: 2 단계, 이미지 3/3

    • Remove the AAA batteries using your fingers.

    편집

  4. Samsung Gear VR with Controller Motherboard Replacement, Controller Motherboard: 3 단계, 이미지 1/2 Samsung Gear VR with Controller Motherboard Replacement, Controller Motherboard: 3 단계, 이미지 2/2

    • Remove the four 5mm Phillips #000 screws.

    편집

  5. Samsung Gear VR with Controller Motherboard Replacement: 4 단계, 이미지 1/1

    • Use the metal spudger to pry the back side of the controller apart from the front.

    • You will have to use the spudger in many different spots along the divide before trying to separate the pieces.

    편집

  6. Samsung Gear VR with Controller Motherboard Replacement: 5 단계, 이미지 1/2 Samsung Gear VR with Controller Motherboard Replacement: 5 단계, 이미지 2/2

    • Pull apart the two halves of the controller to access the motherboard.

    편집

  7. Samsung Gear VR with Controller Motherboard Replacement: 6 단계, 이미지 1/3 Samsung Gear VR with Controller Motherboard Replacement: 6 단계, 이미지 2/3 Samsung Gear VR with Controller Motherboard Replacement: 6 단계, 이미지 3/3

    • Pry on the two pop connectors with the plastic opening tool to detach the motherboard.

    • Separate the motherboard and trackpad from the rear part of the controller.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Jake Criscione

회원 가입일: 01/24/19

587 평판

안내서 3개 작성하였습니다

배지: 11

배지 +8개 더

팀

Cal Poly, Team S18-G3, White Winter 2019 Cal Poly, Team S18-G3, White Winter 2019 회원

CPSU-WHITE-W19S18G3

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 12

전체 시간: 953