소개
Shows how to replace motherboard with pictures and words. Removal of motherboard requires opening the camera and unscrewing screws from motherboard to remove from rear case.
필요한 것
-
-
To remove the wristband of the device, grab the middle loop and pull the band through.
-
-
-
-
Use tweezers to grab the wire ribbon, then pull the wire out of connection.
-
-
-
There are 5 Phillips size 00 screws. Remove all 5 screws.
-
Wire ribbon is attached to the motherboard.
-
-
-
Use tweezers to disconnect the wire as shown. This will loosen the motherboard from the rear case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.