소개

How to remove & replace the phone's back cover.

부품

부품은 필요하지 않습니다.

  1. Orient the phone with the screen facing down.
    • Orient the phone with the screen facing down.

    • Using your thumb, slide the back panel away from the camera to expose the battery.

  2. Grip the battery on its sides, opposite the direction of the white arrow. Pry the battery up. It will pivot at the end with the white arrow. The battery will now be free.
    • Grip the battery on its sides, opposite the direction of the white arrow.

    • Pry the battery up. It will pivot at the end with the white arrow. The battery will now be free.

  3. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Remove the 6 outer screws.
    • Remove the 6 outer screws.

    • The screws should be 3.5 mm in length.

    • Put the screws in a safe place as they are very small and easy to lose.

  5. Snap off back the cover by gently prying around the top and bottom edges with a flat head screwdriver.
    • Snap off back the cover by gently prying around the top and bottom edges with a flat head screwdriver.

    • It may help to slide the touchscreen upwards when removing the back panel.

    • The side buttons will become loose and are prone to fall out, so put these in a safe place.

결론

To reassemble your device, follow these instructions in reverse order.

Saul Villatoro

회원 가입일: 2011년 04월 25일

255 평판

안내서 7개 작성하였습니다

Cal Poly, Team 8-10, Regan Spring 2011 Cal Poly, Team 8-10, Regan Spring 2011 회원

CPSU-REGAN-S11S8G10

4 회원들

안내서 22개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,558