소개

Use this guide to install a rear case.

부품

부품은 필요하지 않습니다.

Slide the battery cover downwards with pressure focused on the center of the cover.
  • Slide the battery cover downwards with pressure focused on the center of the cover.

  • Lift the cover off of the phone.

댓글 쓰기

Grasp the bottom left and right corners of the battery and lift it from its housing.
  • Grasp the bottom left and right corners of the battery and lift it from its housing.

댓글 쓰기

Mac RAM 키트
Mac 속도를 높이십시오. 메모리를 최대한 활용하십시오.
Mac RAM 키트
Mac에서 메모리를 더 많이 확보하십시오.
Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.
  • Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.

댓글 쓰기

The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force. Insert the Plastic Opening Tool in between the front and rear cases. Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.
  • The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force.

  • Insert the Plastic Opening Tool in between the front and rear cases.

  • Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.

댓글 쓰기

Lift the rear case off of the phone.
  • Lift the rear case off of the phone.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Paul Piller

회원 가입일: 2011년 04월 12일

56 평판

안내서 5개 작성하였습니다

Cal Poly, Team 24-57, Amido Spring 2011 Cal Poly, Team 24-57, Amido Spring 2011 회원

CPSU-AMIDO-S11S24G57

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,058