Skip to main content

부품

No parts specified.

  1. Remove batteries before you disassemble the remote Use a case opening tool to gently split the upper and lower case Work around the entire case until the 2 halves come apart completely
    • Remove batteries before you disassemble the remote

    • Use a case opening tool to gently split the upper and lower case

    • Work around the entire case until the 2 halves come apart completely

  2. Release the circuit board by gently pushing the plastic tab away from the board Use minimal force to avoid breaking it
    • Release the circuit board by gently pushing the plastic tab away from the board

    • Use minimal force to avoid breaking it

    • Lift circuit board off top cover to expose the rubber button membrane

    • Lift off the rubber button membrane

  3. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  4. During reassembly make sure that you correctly place the battery cover retainer on the read case During reassembly make sure that you correctly place the battery cover retainer on the read case
    • During reassembly make sure that you correctly place the battery cover retainer on the read case

  5. When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover
    • When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover

결론

To reassemble your device, follow these instructions in reverse order.

다른 9명이 해당 안내서를 완성하였습니다.

Richdave

회원 가입일: 2010년 04월 09일

29,264 평판

안내서 30개 작성하였습니다

Master Techs Master Techs 회원

Community

286 회원들

안내서 808개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 9

지난 7일: 62

지난 30일: 226

전체 시간: 24,170