소개

This guide will require the user to disassemble the rear and top panel to access the button.

부품

부품은 필요하지 않습니다.

Remove the hinged top panel by taking the small pins at the bottom of the panel out of their holes. Remove the hinged top panel by taking the small pins at the bottom of the panel out of their holes. Remove the hinged top panel by taking the small pins at the bottom of the panel out of their holes.
  • Remove the hinged top panel by taking the small pins at the bottom of the panel out of their holes.

댓글 쓰기

Using a Phillips #2 screwdriver, remove the four 1" long, Phillips, PH#2  screws on the back of the printer.
  • Using a Phillips #2 screwdriver, remove the four 1" long, Phillips, PH#2 screws on the back of the printer.

댓글 쓰기

Gently lift the top panel while simultaneously pulling off the back panel. Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot. Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot.
  • Gently lift the top panel while simultaneously pulling off the back panel.

  • Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot.

댓글 쓰기

Mac RAM 키트
Mac 속도를 높이십시오. 메모리를 최대한 활용하십시오.
Mac RAM 키트
Mac에서 메모리를 더 많이 확보하십시오.
Remove front panel by gently moving the holes on the panel from the pegs attached to the main printer body, one at a time. Remove front panel by gently moving the holes on the panel from the pegs attached to the main printer body, one at a time. Remove front panel by gently moving the holes on the panel from the pegs attached to the main printer body, one at a time.
  • Remove front panel by gently moving the holes on the panel from the pegs attached to the main printer body, one at a time.

댓글 쓰기

Using a Phillips #2 screwdriver, remove the two, 1", Phillips, PH#2 screws on the front face of the printer.
  • Using a Phillips #2 screwdriver, remove the two, 1", Phillips, PH#2 screws on the front face of the printer.

댓글 쓰기

Using a plastic opening tool, gently lift one side of the top panel from its peg. Repeat for the other side. Lift the top panel from the front to remove entirely.
  • Using a plastic opening tool, gently lift one side of the top panel from its peg.

  • Repeat for the other side.

  • Lift the top panel from the front to remove entirely.

  • Turn over the top panel to reveal the underside, revealing the button.

댓글 쓰기

Using a Phillips #2 screwdriver, remove the two, 1", Phillips, PH#2 screws from the underside of the top panel
  • Using a Phillips #2 screwdriver, remove the two, 1", Phillips, PH#2 screws from the underside of the top panel

댓글 쓰기

Remove the clear plastic piece and the orange button from the panel. Remove the orange button and the spring from the clear plastic piece.
  • Remove the clear plastic piece and the orange button from the panel.

  • Remove the orange button and the spring from the clear plastic piece.

  • Replace the button and reassemble the printer following the directions in reverse order.

댓글 쓰기

결승점

다른 한 분이 해당 안내서를 완성하였습니다.

bbaustin

회원 가입일: 2011년 10월 12일

199 평판

안내서 6개 작성하였습니다

Cal Poly, Team 17-18, Regan Fall 2011 Cal Poly, Team 17-18, Regan Fall 2011 회원

CPSU-REGAN-F11S17G18

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 11

전체 시간: 2,315