기기를 수리하세요 커뮤니티 상점

Samsung Powebot VR9000 Battery Replacement

소개

This guide will teach you how to replace the battery of your POWERbot. This can be done to fix your POWERbot's charge retention issues.

필요한 것

  1. Samsung Powebot VR9000 Battery Replacement, Battery: 1 단계, 이미지 1/2 Samsung Powebot VR9000 Battery Replacement, Battery: 1 단계, 이미지 2/2

    • Turn off the emergency switch located at the bottom right of the POWERbot.

    편집

  2. Samsung Powebot VR9000 Battery Replacement: 2 단계, 이미지 1/2 Samsung Powebot VR9000 Battery Replacement: 2 단계, 이미지 2/2

    • Unscrew the two 6mm Phillips #1 screws and remove the lid, exposing the battery.

    편집

  4. Samsung Powebot VR9000 Battery Replacement: 3 단계, 이미지 1/2 Samsung Powebot VR9000 Battery Replacement: 3 단계, 이미지 2/2

    • Follow the wires and find the small white box next to the battery.

    • On the side of the white box facing the battery, find the rigid tab.

    편집

  5. Samsung Powebot VR9000 Battery Replacement: 4 단계, 이미지 1/1

    • Push the tab inwards to the white box and pull the wires up. This will release the wires from the white box, allowing you to remove the battery.

    편집

  6. Samsung Powebot VR9000 Battery Replacement: 5 단계, 이미지 1/2 Samsung Powebot VR9000 Battery Replacement: 5 단계, 이미지 2/2

    • Remove the battery by holding the battery in place and partially righting the POWERbot so the battery falls out.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Alexandra Jensen

회원 가입일: 04/24/17

138 평판

안내서 1개 작성함

배지: 5

배지 +2개 더

팀

Cal Poly, Team S15-G3, Banghart Spring 2017 Cal Poly, Team S15-G3, Banghart Spring 2017 회원

CPSU-BANGHART-S17S15G3

4 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 10

30일 전: 36

전체 시간: 6,067