기기를 수리하세요 커뮤니티 상점

Samsung SC MX-20 Hand Strap Replacement

소개

When you use your camcorder to record video, you’ll find that the hand strap is one of the most useful components to stabilize your image/video. The hand strap in your device is likely to wear out and become unusable. If you’re looking to replace a worn out or damaged hand strap, follow the steps in this guide.

필요한 것

  1. Samsung SC MX-20 Hand Strap Replacement, Hand Strap: 1 단계, 이미지 1/3 Samsung SC MX-20 Hand Strap Replacement, Hand Strap: 1 단계, 이미지 2/3 Samsung SC MX-20 Hand Strap Replacement, Hand Strap: 1 단계, 이미지 3/3

    • Remove all eight screws using the Phillips #000 screwdriver.

    편집

  2. Samsung SC MX-20 Hand Strap Replacement: 2 단계, 이미지 1/1

    • Pull apart the sides of the camera once the screws are removed.

    편집

  4. Samsung SC MX-20 Hand Strap Replacement: 3 단계, 이미지 1/1

    • Remove the three screws using the Phillips #000 screwdriver.

    편집

  5. Samsung SC MX-20 Hand Strap Replacement: 4 단계, 이미지 1/1

    • Remove the three screws using the Phillips #000 screwdriver.

    편집

  6. Samsung SC MX-20 Hand Strap Replacement: 5 단계, 이미지 1/1

    • Remove the four screws using a Phillips #000 screwdriver.

    편집

  7. Samsung SC MX-20 Hand Strap Replacement: 6 단계, 이미지 1/2 Samsung SC MX-20 Hand Strap Replacement: 6 단계, 이미지 2/2

    • Remove the hand strap from the device.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 172