소개

It may become necessary to replace the logic board on this cell phone in order to correct a problem. Following this guide will make removal quite easy.

부품

부품은 필요하지 않습니다.

  1. Slide the latch on the back of the phone up.
    • Slide the latch on the back of the phone up.

    댓글 쓰기

  2. Remove the battery.
    • Remove the battery.

    댓글 쓰기

    • After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.

    댓글 쓰기

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.

    댓글 쓰기

    • With a #0 Phillips screwdriver remove the screw which you just uncovered.

    댓글 쓰기

    • Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open.

    • Then disconnect the small power connector near the top of the phone.

    댓글 쓰기

    • Gently pry up the ribbon-type connector with the spudger.

    댓글 쓰기

    • Carefully pry the logic board from the case with the spudger.

    댓글 쓰기

결승점

Nathan Brink

회원 가입일: 2010년 04월 11일

1 평판

안내서 7개 작성하였습니다

Cal Poly, Team 34-59, Forte Spring 2010 Cal Poly, Team 34-59, Forte Spring 2010 회원

CPSU-FORTE-S10S34G59

4 회원들

안내서 14개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 2,632