소개

Introduction

This guide will teach readers on how to replace the face plate of their Samsung SGH-X495. It will explain how to identify push pins and tabs and also how to remove them.

부품

부품은 필요하지 않습니다.

  1. First, remove the 2 silver stickers (as indicated by the circles) with a a safety or push pin to reveal 2 screws.
    • First, remove the 2 silver stickers (as indicated by the circles) with a a safety or push pin to reveal 2 screws.

  2. Remove the 2 (5.6 mm) philips head screws with your safety or push pin.
    • Remove the 2 (5.6 mm) philips head screws with your safety or push pin.

  3. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  4. As shown above, with a plastic pry tool, begin working at the top corner and down each side.  The face plate has 10 tabs that hook into the phone's body. Before removing the 2 tabs on the bottom, the 3 tabs on either side must be free first.
    • As shown above, with a plastic pry tool, begin working at the top corner and down each side. The face plate has 10 tabs that hook into the phone's body.

    • Before removing the 2 tabs on the bottom, the 3 tabs on either side must be free first.

    • Note: The bottom 2 are the most challenging to remove.

      • Note: When reassembling start with the bottom two tabs.

  5. Continue down each side toward the bottom with your pry tool. Note: It may help to use multiple pry tools to help hold it open.
    • Continue down each side toward the bottom with your pry tool.

    • Note: It may help to use multiple pry tools to help hold it open.

    • Second photo: location of the tabs.

  6. With 8 tabs released, the face plate is nearly free. With the phone in your left hand, gently wiggle the face plate from side to side and push the face place upward.
    • With 8 tabs released, the face plate is nearly free.

    • With the phone in your left hand, gently wiggle the face plate from side to side and push the face place upward.

    • Note: A strip of double sided tape holds the faceplate, so expect some resistance

결론

To reassemble your device, follow these instructions in reverse order.

Matthew Hove

회원 가입일: 2011년 01월 05일

1,031 평판

안내서 10개 작성하였습니다

Cal Poly, Team 3-40, Regan Winter 2011 Cal Poly, Team 3-40, Regan Winter 2011 회원

CPSU-REGAN-W11S3G40

4 회원들

안내서 20개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,948