소개

This is a step by step guide on how to replace the Samsung SPH-A500 logic board.

부품

부품은 필요하지 않습니다.

  1. Turn phone over
    • Turn phone over

    • Push the gray tab above the battery forward to remove the battery.

    댓글 쓰기

  2. Remove the battery from the phone, which will reveal four screws at the corners of the phone.
    • Remove the battery from the phone, which will reveal four screws at the corners of the phone.

    댓글 쓰기

    • Remove all four screws using a small Philips screwdriver.

    • Note: The screws do not need to be completely removed from the case, as long as they are unscrewed.

    댓글 쓰기

    • Remove back cover by carefully prying it open.

    • Note: Some force may be required.

    댓글 쓰기

    • Pull the side tabs outward while simultaneously lifting up the circuit board.

    • Do not completely pull out the circuit board.

    댓글 쓰기

    • Look for the clip at the top right corner of the logic board.

    댓글 쓰기

    • Remove the clip from the logic board.

    댓글 쓰기

    • Remove the logic board.

    • Replace the broken logic board with a new one.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Nick Dominikovic

회원 가입일: 2010년 04월 13일

139 평판

안내서 4개 작성하였습니다

Cal Poly, Team 18-100, Johann Spring 2010 Cal Poly, Team 18-100, Johann Spring 2010 회원

CPSU-JOHANN-S10S18G100

4 회원들

안내서 10개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,879