기기를 수리하세요 커뮤니티 상점

Samsung Series 9 NP900X3A Back Panel Replacement

필요한 것

  1. Samsung Series 9 NP900X3A Back Panel Replacement, Back Panel: 1 단계, 이미지 1/1

    • Locate the rubber feet at every corner of the laptop back panel. Use the ifixit prying tool, and break the adhesive between the rubber feet, and the case.

    • Screws securing the back panel underneath the adhesive will be exposed.

    • Removing the rubber feet will weaken the adhesive making reassembly difficult. Apply new adhesive if you choose to place the rubber feet back on to the device.

    번역하기

  3. Samsung Series 9 NP900X3A Back Panel Replacement: 2 단계, 이미지 1/1

    • Use a Phillips #0 screwdriver to remove the ten 0.2mm screws from the bottom cover.

    • Keep track of the screws and their placement on the laptop. This will help make reassembly easier and more organized.

    번역하기

  4. Samsung Series 9 NP900X3A Back Panel Replacement: 3 단계, 이미지 1/3 Samsung Series 9 NP900X3A Back Panel Replacement: 3 단계, 이미지 2/3 Samsung Series 9 NP900X3A Back Panel Replacement: 3 단계, 이미지 3/3

    • Find an opening on the back of the laptop. Use the plastic prying tool to help pry open the back panel of the laptop.

    • Use both hands when removing the back case cover. Too much force will bend the cover making it difficult to reassemble.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Zahir Sanchez

회원 가입일: 02/08/18

493 평판

안내서 3개 작성하였습니다

배지: 7

배지 +4개 더

팀

University of North Texas, Team S2-G4, Thomas Spring 2018 University of North Texas, Team S2-G4, Thomas Spring 2018 회원

UNT-THOMAS-S18S2G4

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 16

전체 시간: 1,106