주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

This guide will assist users to replace a damaged or nonoperational jog button.

부품

지정된 부품이 없습니다.

  1. Start by removing the screen bezel. Use a pair of spudgers to pry between the bezel and the rest of the monitor. Ideally use plastic tools as this step could damage the edges of the screencover.
    • Start by removing the screen bezel.

    • Use a pair of spudgers to pry between the bezel and the rest of the monitor.

    • Ideally use plastic tools as this step could damage the edges of the screencover.

    • lay monitor on its back and pull off screen cover.

  2. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  3. Flip the monitor over so that it is facedown. remove the single screw in the middle using a #2 Phillips screwdriver.
    • Flip the monitor over so that it is facedown.

    • remove the single screw in the middle using a #2 Phillips screwdriver.

    • Remove the backing to reveal the Jog Button.

  4. Disconnect signal cable to power supply board.
    • Disconnect signal cable to power supply board.

    • Remove and replace jog button.

결론

To reassemble your device, follow these instructions in reverse order. Ensure the bezel completely snaps in place all around monitor.

다른 한 분이 해당 안내서를 완성하였습니다.

Jake Ritter

회원 가입일: 2018년 01월 22일

100 평판

안내서 1개 작성함

Cal Poly, Team S11-G1, Banghart Winter 2018 Cal Poly, Team S11-G1, Banghart Winter 2018 회원

CPSU-BANGHART-W18S11G1

4 회원들

안내서 3개 작성하였습니다

i have a samsung u28d590d and it works just the same. simple and easy as the guide says.

joshsc2 - 답글

Does anyone have the part number or where I can buy the new jog button?

Kyle Gulliford - 답글

댓글 쓰기

조회 통계:

24 시간 전: 4

7일 전: 21

30일 전: 91

전체 시간: 2,453