Skip to main content

소개

Follow this guide to replace a faulty headphone jack in your Sandisk Sansa m230 Series MP3 Player.

  1. Remove the battery compartment cover.
    • Remove the battery compartment cover.

    • Remove the battery.

  2. Locate and remove the screw next to the battery compartment lid.
    • Locate and remove the screw next to the battery compartment lid.

  3. Locate the interlocking pegs along the seam of the device's casings.
    • Locate the interlocking pegs along the seam of the device's casings.

    • Gently pry the pegs apart one at a time, working your way around the case.

    • Be careful when prying apart the pegs: they are made of plastic and may break.

  4. The battery contact springs may prevent the case from separating.
    • The battery contact springs may prevent the case from separating.

    • Push the battery contact springs down through the hole in the case.

  5. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  6. The casing protecting the USB and headphone jacks must be removed.
    • The casing protecting the USB and headphone jacks must be removed.

    • Locate and gently pry apart the two interlocking clips holding it in place.

    • The outer casings may now be removed and the MP3 player should separate.

  7. You now have access to all components found on the inside of the device!
    • You now have access to all components found on the inside of the device!

  8. Locate the headphone jack on the motherboard.
    • Locate the headphone jack on the motherboard.

  9. Ensure the hot end of the soldering iron is elevated on a metal stand when not in use to prevent burns.
    • Ensure the hot end of the soldering iron is elevated on a metal stand when not in use to prevent burns.

    • The solder and soldering iron are very hot! Do not touch unless you are wearing appropriate protective gloves.

  10. Use soldering iron to melt the existing solder at the three headphone jack connections. Use soldering iron to melt the existing solder at the three headphone jack connections. Use soldering iron to melt the existing solder at the three headphone jack connections.
    • Use soldering iron to melt the existing solder at the three headphone jack connections.

  11. Remove the faulty headphone jack from the motherboard.
    • Remove the faulty headphone jack from the motherboard.

  12. Align the new headphone jack appropriately on the motherboard for soldering.
    • Align the new headphone jack appropriately on the motherboard for soldering.

  13. Use the soldering iron and solder to create three stable connections between the motherboard and the headphone jack. Allow the new solder to cool and harden before reassembling the MP3 player. Allow the new solder to cool and harden before reassembling the MP3 player.
    • Use the soldering iron and solder to create three stable connections between the motherboard and the headphone jack.

    • Allow the new solder to cool and harden before reassembling the MP3 player.

결론

To reassemble your device, follow these instructions in reverse order.

James Thorne

회원 가입일: 2013년 11월 05일

625 평판

안내서 6개 작성하였습니다

UMass Dartmouth, Team 1-8, Shastany Fall 2013 UMass Dartmouth, Team 1-8, Shastany Fall 2013 회원

UMASSD-SHASTANY-F13S1G8

3 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 3

전체 시간: 870