기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement

소개

Follow this guide to replace a faulty headphone jack in your Sandisk Sansa m230 Series MP3 Player.

필요한 것

  1. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement, Sandisk Sansa m230 Series mp3 player Teardown: 1 단계, 이미지 1/1

    • Remove the battery compartment cover.

    • Remove the battery.

    번역하기

  2. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 2 단계, 이미지 1/1

    • Locate and remove the screw next to the battery compartment lid.

    번역하기

  3. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 3 단계, 이미지 1/1

    • Locate the interlocking pegs along the seam of the device's casings.

    • Gently pry the pegs apart one at a time, working your way around the case.

    • Be careful when prying apart the pegs: they are made of plastic and may break.

    번역하기

  4. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 4 단계, 이미지 1/1

    • The battery contact springs may prevent the case from separating.

    • Push the battery contact springs down through the hole in the case.

    번역하기

  6. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 5 단계, 이미지 1/1

    • The casing protecting the USB and headphone jacks must be removed.

    • Locate and gently pry apart the two interlocking clips holding it in place.

    • The outer casings may now be removed and the MP3 player should separate.

    번역하기

  7. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 6 단계, 이미지 1/1

    • You now have access to all components found on the inside of the device!

    번역하기

  8. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement, Headphone Jack: 7 단계, 이미지 1/1

    • Locate the headphone jack on the motherboard.

    번역하기

  9. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 8 단계, 이미지 1/1

    • Ensure the hot end of the soldering iron is elevated on a metal stand when not in use to prevent burns.

    • The solder and soldering iron are very hot! Do not touch unless you are wearing appropriate protective gloves.

    번역하기

  10. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 9 단계, 이미지 1/3 Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 9 단계, 이미지 2/3 Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 9 단계, 이미지 3/3

    • Use soldering iron to melt the existing solder at the three headphone jack connections.

    번역하기

  11. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 10 단계, 이미지 1/1

    • Remove the faulty headphone jack from the motherboard.

    번역하기

  12. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 11 단계, 이미지 1/1

    • Align the new headphone jack appropriately on the motherboard for soldering.

    번역하기

  13. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 12 단계, 이미지 1/3 Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 12 단계, 이미지 2/3 Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 12 단계, 이미지 3/3

    • Use the soldering iron and solder to create three stable connections between the motherboard and the headphone jack.

    • Allow the new solder to cool and harden before reassembling the MP3 player.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 11명과 함께

James Thorne

회원 가입일: 11/05/13

638 평판

안내서 6개 작성하였습니다

배지: 7

배지 +4개 더

팀

UMass Dartmouth, Team 1-8, Shastany Fall 2013 UMass Dartmouth, Team 1-8, Shastany Fall 2013 회원

UMASSD-SHASTANY-F13S1G8

3 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,146