기기를 수리하세요 커뮤니티 상점

Sandisk Sansa m230 Series mp3 player Microphone Replacement

소개

To replace a faulty microphone follow the steps in this guide. This may be your only option if you find yourself unable to make voice recordings anymore with your device.

필요한 것

  1. Sandisk Sansa m230 Series mp3 player Microphone Replacement, Sandisk Sansa m230 Series mp3 player Teardown: 1 단계, 이미지 1/1

    • Remove the battery compartment cover.

    • Remove the battery.

    편집

  2. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 2 단계, 이미지 1/1

    • Locate and remove the screw next to the battery compartment lid.

    편집

  3. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 3 단계, 이미지 1/1

    • Locate the interlocking pegs along the seam of the device's casings.

    • Gently pry the pegs apart one at a time, working your way around the case.

    • Be careful when prying apart the pegs: they are made of plastic and may break.

    편집

  4. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 4 단계, 이미지 1/1

    • The battery contact springs may prevent the case from separating.

    • Push the battery contact springs down through the hole in the case.

    편집

  5. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 5 단계, 이미지 1/1

    • The casing protecting the USB and headphone jacks must be removed.

    • Locate and gently pry apart the two interlocking clips holding it in place.

    • The outer casings may now be removed and the MP3 player should separate.

    편집

  7. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 6 단계, 이미지 1/1

    • You now have access to all components found on the inside of the device!

    편집

  8. Sandisk Sansa m230 Series mp3 player Microphone Replacement, Microphone: 7 단계, 이미지 1/1

    • Locate microphone on motherboard.

    편집

  9. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 8 단계, 이미지 1/1

    • Find where microphone is connected to motherboard via solder.

    편집

  10. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 9 단계, 이미지 1/2 Sandisk Sansa m230 Series mp3 player Microphone Replacement: 9 단계, 이미지 2/2

    • Use the soldering iron to liquefy the solder connecting the microphone to the motherboard.

    편집

  11. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 10 단계, 이미지 1/1

    • The solder and soldering iron will be very hot at this time. Do not touch unless wearing protective gloves as you will be burnt.

    • When not in use, be sure to always elevate the hot end of the soldering iron on a metal stand to prevent incidental burns.

    편집

  12. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 11 단계, 이미지 1/2 Sandisk Sansa m230 Series mp3 player Microphone Replacement: 11 단계, 이미지 2/2

    • Remove the faulty microphone as you heat and melt the soldering points.

    편집

  13. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 12 단계, 이미지 1/1

    • Replace the faulty microphone with a new one in working order.

    편집

  14. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 13 단계, 이미지 1/2 Sandisk Sansa m230 Series mp3 player Microphone Replacement: 13 단계, 이미지 2/2

    • With the new microphone in place, use the soldering iron and solder to create a stable connection between the motherboard and microphone.

    • Give the new solder time to cool and harden.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

James Thorne

회원 가입일: 11/05/13

638 평판

안내서 6개 작성하였습니다

배지: 7

배지 +4개 더

팀

UMass Dartmouth, Team 1-8, Shastany Fall 2013 UMass Dartmouth, Team 1-8, Shastany Fall 2013 회원

UMASSD-SHASTANY-F13S1G8

3 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 473