1. Be sure to unplug the vacuum before disassembling it to prevent electric shock.
    • Be sure to unplug the vacuum before disassembling it to prevent electric shock.

    • Lay vacuum on side.

    • Using a Phillips screwdriver, unscrew the screw behind the front wheels, on the edge of the underside of the vacuum cleaner.

    댓글 쓰기

  2. Stand the vacuum upright and identify the dial on the front of the vacuum.
    • Stand the vacuum upright and identify the dial on the front of the vacuum.

    • Unscrew the screw using a Torx 20 screwdriver

    • Pull the dial out.

    댓글 쓰기

    • Lift the cover off of the vacuum.

    댓글 쓰기

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Identify the two gray metal plates at the front of the vacuum.

    • Using the T20 Torx screwdriver, remove the four screws on the smaller gray plate holding the larger gray metal plates.

    댓글 쓰기

    • Remove the small metal plate with the black bolt in the center.

    • Repeat on opposite side near the other wheel

    댓글 쓰기

    • Remove the larger gray metal plate.

    • Repeat on opposite side near other wheel.

    댓글 쓰기

    • Remove the front wheels by lifting the silver bar that attaches the two wheels.

    • Detach the spring attaching the wheels to the vacuum.

    댓글 쓰기

    • Remove a wheel from the wheel's axel by pulling off the wheel.

    • Slide spring off.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Caycie Pascual

회원 가입일: 2012년 09월 26일

1 평판

안내서 5개 작성하였습니다

Cal Poly, Team 16-58, Forte Fall 2012 Cal Poly, Team 16-58, Forte Fall 2012 회원

CPSU-FORTE-F12S16G58

5 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 2

전체 시간: 688