Sanyo Katana Eclipse X Battery Replacement - iFixit 수리 안내서

소개

This guide will illustrate for you how to replace the battery from a Sanyo Katana Eclipse X.

필요한 것

1 단계 Back Panel

Sanyo Katana Eclipse X Battery Replacement, Back Panel: 1 단계, 이미지 1/2

Sanyo Katana Eclipse X Battery Replacement, Back Panel: 1 단계, 이미지 2/2

Press the battery release button located on the back of the phone.
With the button depressed, pull down on the battery protector to remove it from the phone.
The phone's battery will now be exposed.

2 단계

Sanyo Katana Eclipse X Battery Replacement: 2 단계, 이미지 1/1

Slide a thin object under the white tab located on the bottom of the battery and carefully lift away from the phone.
A small, flat-tip screwdriver or credit card may be helpful for this step.
The battery should now be free of the phone.

3 단계 Battery

Sanyo Katana Eclipse X Battery Replacement, Battery: 3 단계, 이미지 1/1

Align the copper receptors on the back of your battery so the phone's copper receptors are touching the battery terminals.
Refer to photo illustrations.
Using your thumb, apply gentle pressure to the battery until it clicks into place.

4 단계

Sanyo Katana Eclipse X Battery Replacement: 4 단계, 이미지 1/1

Take the phone’s back casing and set it over the battery.
Apply gentle pressure, pushing towards the top of the phone until your hear a click.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 6명과 함께

Thomas Scaggs

회원 가입일: 10/15/12

209 평판

안내서 2개 작성하였습니다

배지 +2개 더

팀

University of Maine, Team 1-3, Diaz Fall 2012 University of Maine, Team 1-3, Diaz Fall 2012 회원

UMAINE-DIAZ-F12S1G3

5 회원들

안내서 6개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 440