주요 콘텐츠로 건너뛰기

Sanyo Katana Screen Protector Replacement

필요한 것

  1. Sanyo Katana Screen Protector Replacement, Screen Protector: 1 단계, 이미지 1/2 Sanyo Katana Screen Protector Replacement, Screen Protector: 1 단계, 이미지 2/2
    • With the flat end of a spudger, remove the plastic covers located on the corners of the display near the hinge and above the screen, revealing four screws underneath.

  2. Sanyo Katana Screen Protector Replacement: 2 단계, 이미지 1/2 Sanyo Katana Screen Protector Replacement: 2 단계, 이미지 2/2
    • Remove the 4.4mm screw in each corner using the Tri-wing Y0 screwdriver.

  3. Sanyo Katana Screen Protector Replacement: 3 단계, 이미지 1/2 Sanyo Katana Screen Protector Replacement: 3 단계, 이미지 2/2
    • Carefully pry the screen protector off the phone using the flat end of the spudger.

    • This will require a bit of force as the back of the screen protector is lined with an adhesive material.

    • Once free from the adhesive, pull the screen protector away from the phone.

결론

To reassemble your device, follow these instructions in reverse order.

StephenYH

회원 가입일: 03/11/13

20 평판

안내서 3개 작성하였습니다

Clemson, Team 12-1, Benson Spring 2013 Clemson, Team 12-1, Benson Spring 2013 회원

CLEM-BENSON-S13S12G1

4 회원들

안내서 20개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 2

전체 시간: 307