소개

Disassembly instructions to get at the hard drive of a Seagate FreeAgent 880GB drive

부품

부품은 필요하지 않습니다.

This guide holds true for most all FreeAgentGo drives that have this body style
  • This guide holds true for most all FreeAgentGo drives that have this body style

댓글 쓰기

The first thing you'll need to do is get a spudger of some sort and get underneath an edge. It doesn't expressly matter which, I found starting at the front corner the the easiest.
  • The first thing you'll need to do is get a spudger of some sort and get underneath an edge. It doesn't expressly matter which, I found starting at the front corner the the easiest.

  • Work your way all the way around the edges, the cover is being held in place by rubber cement-like glue.

댓글 쓰기

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
As you can see here, the back edge where the light is has a small connector to the rest of the board. this pulls out easily.
  • As you can see here, the back edge where the light is has a small connector to the rest of the board. this pulls out easily.

댓글 쓰기

The bottom casing lets the drive fall out and you have two metal shielding pieces holding the drive in place with four rubber bumpers. The USB dongle is held in place with tape, but it's easily pulled up and removed from the plug.
  • The bottom casing lets the drive fall out and you have two metal shielding pieces holding the drive in place with four rubber bumpers. The USB dongle is held in place with tape, but it's easily pulled up and removed from the plug.

댓글 쓰기

After the USB dongle is removed, there are four phillips screws on the sides that hold the two metal pieces in place. Once those are removed, the rubber bumpers are easily removed as they are only held in place by the cement as well.
  • After the USB dongle is removed, there are four phillips screws on the sides that hold the two metal pieces in place. Once those are removed, the rubber bumpers are easily removed as they are only held in place by the cement as well.

댓글 쓰기

The top cover slides backwards, away from the board to allow access to the 888GB drive. The drive pulls out from here and easily disconnects from the controller board.
  • The top cover slides backwards, away from the board to allow access to the 888GB drive. The drive pulls out from here and easily disconnects from the controller board.

decent teardown. Just a suggestion, use natral lightning from the sun. The camera's flash doesn't help when your that close.

Nicholas Ouimet - 답글

Very good teardown. It would be good to know if it is a ATA drive or SATA type in case anyone needs to replace it.

alan - 답글

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

zenmastr

회원 가입일: 2009년 11월 05일

335 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 22

지난 30일: 90

전체 시간: 30,908